When Technics set about making plans for its new flagship wireless headphones, the EAH-A1000, it knew it couldn't just enlarge the 10mm Magnetic Fluid Driver used in the five-star, Award-winning EAH-AZ100 wireless earbuds and call it a day.

The magnetic fluid technology – an oil-like substance with magnetic properties that reduces the rocking vertical movement of the diaphragm without adding mass – worked successfully in delivering a clear, detailed and low-distortion sound in the AZ100 buds. But the larger 40mm drivers required in an over-ear model proved a greater challenge.

As part of the pre-launch briefing of Technics' new EAH-A1000 over-ear wireless headphones, I got a chance to hear from Technics' headphones and acoustic departments in Tokyo about the trial-and-error process for developing the new flagship headphones' drivers, along with an extensive look at all the elements inside them – so here's a closer look at the new drivers of the A1000 headphones.

Magnetic fluid driver: the next chapter

Planning for the EAH-A1000 over-ears started pretty much after the AZ100 buds, with the question: "Can magnetic fluid work in a 40mm driver?"

A larger driver results in greater excursion, more possibility for flexing, and more scope for distortion. Simply using the same tech in a bigger driver "didn't deliver the sound we were aiming for," says Technics. The magnetic fluid sits between the voice coil and driver magnet, and is able to precisely support the driver's movement so it is more consistent, but too much damping could limit the natural expression of music.

While excited by the potential of the magnetic fluid technology, Technics' goal wasn't to simply build a larger driver, says Riku Takeda, acoustic engineer at Technics. It was to "create a new over-ear headphone driver that could go beyond hi-fi speaker performance."

The main aim for this new driver was to reduce distortion as much as possible for a clearer, cleaner sound, but without sacrificing the power, detail or natural resonances of music. And so the newly developed 40mm drivers in the A1000 feature a combination of technologies, all with the aim of delivering an immersive listening experience.

The first of these new technologies takes inspiration from the brand's own hi-fi speakers, with the modified magnetic fluid drivers enhanced with an SST (Symmetrical Surround Technology) Edge. This is a similar technology used in Technics' flagship SB-R1 speakers.

This surround's distinctive shape ensures that a symmetrical volume of air is displaced by the backward and forward movement of the driver. The cuts in the surround increase the flexibility of the edge, while also reducing distortion.

"No compromise on shape; no compromise on material"

Additionally, the diaphragm of the driver is made of a "pure carbon fibre" material, chosen for its lightweight and rigid properties that ensure fast, responsive performance. Technics further clarifies that this 'pure' carbon fibre material isn't composed exclusively of carbon fibre, but it refers to a "non-composite, non-laminated" diaphragm construction. A very thin but stiff layer, essentially.

As larger drivers naturally flex more as they move, Technics settled upon a complex shape consisting of a cone and a raised dome to further stabilise the movement of the driver.

This posed another challenge, as the mould for this complex geometry (in the relatively small dimensions of a headphone driver) was difficult to produce in mass quantities consistently without deformations.

The team experimented with alternative shapes and materials to get a more stable, consistent moulding, with a long trial-and-error process – but every 'solution' resulted in a less-than-ideal sound. A flatter cone geometry would make things simpler, but it resulted in a less powerful, muddier and less clear sound. A laminated structure would improve moulding stability, but it delivered a narrower soundstage compared with the pure carbon fibre material.

Ultimately, Technics decided that the compromises to the sound quality were simply "not acceptable to us", and ploughed ahead with these two necessary elements of the complex shape of the diaphragm, with some solutions, to achieve the desired sound that Technics wanted. This included strengthening the carbon fibre material itself by changing the direction of the fibres woven in, and adding a 'rib' to the dome to add stability.

Technics says it's a combination of all these different technologies, not just one element, of the new driver that is key to delivering accurate bass, clear highs, and a natural spatial expression from the A1000 headphones.

The development doesn't stop at the drivers themselves. The new 'baffle flat structure' minimises the uneven surfaces around the driver to reduce the effect of unwanted reflections, while an 'acoustic control chamber' behind the driver helps to manage airflow.

These combine to deliver a "natural sound field with clear imaging" and to ensure the sound is balanced without emphasising any specific frequency range.

Sound quality is just one aspect of the Technics EAH-A1000. Every product in Technics is guided by three philosophies: sound, technology and design.

The design of the headphones and all the necessary features (connectivity, ANC, call quality) need to be up to scratch, too, with Technics acknowledging that "personal audio" products such as headphones have huge demands from customer expectations these days. Over-ear headphones are more visible than earbuds, too, so achieving the design and style of the premium A1000 to a high level became even more important.

The design of the new over-ears – from the slender 'flow arm' structure, the headband's clamping pressure, and evenly distributed plush memory foam cushions – has been given as much care and attention by the Technics team.

We're shown various prototypes of different ear cushion shapes, arm structures and variations in the spun metal plate with the Technics logo adorned (check out the gallery above) – examples of more trial-and-error processes undergone by the design team to achieve the 'right' look and feel for the EAH-A1000 headphones.

The philosophy remains the same

Ultimately, though, anything that affects sound quality will need final approval by the acoustics team, as for Technics, the sound philosophy is most important.

"If sound quality isn't achieved to our high standard level, we don't bring it to the market," says Technics. Every audio product, including the EAH-A1000, is subject to the approval process by Technics' internal Sound Committee, which includes Yu Tanaka, who was responsible for the magnetic fluid driver in the A1000 and set the targets for the headphones' sound quality, and Technics' brand director Michiko Ogawa, who has the final say. If those sonic targets aren't met, they would simply postpone the launch until they were happy with the sound performance, I'm told.

Technics' head of headphone business, Kazunori Otsu, says that in the 60+ years of Technics' lifetime, "high quality music experiences" have progressed from in the home, with dedicated hi-fi separates, to almost anywhere in everyday life thanks to portable headphones.

He states that while the "way we listen to music has changed" over the years, "Technics' passion has not."

MORE:

Read our Technics EAH-A1000 review

Technics is celebrating 55 years of its legendary SL-1200 turntable with a limited-edition design

Bose’s QuietComfort Ultra Headphones (2nd Gen) might be over a year old now, but they are gaining new sonic powers. The bad news? Not all the features are available to all users.

The latest firmware update is called 10.12.12 and it brings four new features to play.

First up, Bluetooth LE Audio support. This next-gen version is more efficient than standard Bluetooth, and supports the LC3 codec which has better sound quality than the standard SBC you find with bog-standard Bluetooth. It’s worth noting, however, that some don’t think it delivers on this promise.

The greater efficiency could help prolong battery life too, though Bose hasn’t commented on this in the firmware update notes, so any gain is likely to be marginal. And LE Audio opens the door to Auracast, which lets devices broadcast to multiple headphones at once, so you could tune into a news channel in an airport lounge, for example.

The downside? Bluetooth LE Audio doesn’t work with Apple devices, so this is for Android and Windows users only.

The update also brings 5.1 spatial audio with head tracking to compatible Android devices, and higher-quality gaming and voice audio over a wired USB-C cable from a compatible PC or mobile device. It also brings improved USB compatibility with web conferencing applications, for when you’re taking care of business.

Other big headphone makers also support Bluetooth LE Audio on select models such as the Sony WH-1000XM6, though the recently unveiled Sennheiser Momentum True Wireless 5 will get it only via a future firmware update.

Still, Bose’s move is proof that once you buy a pair of wireless headphones, they can keep getting better. If you’re not using an iPhone, that is.

Keep an eye on the Bose app to see when the update is available. It should download automatically, but you’ll need to keep your headphones connected to your device while it transfers, which can take up to 40 minutes. Then actually installing it can take another 15 minutes.

MORE:

Read our Bose QuietComfort Ultra Headphones (2nd Gen) review

Bose QuietComfort Headphones (2nd Gen) vs QuietComfort Ultra Headphones (2nd Gen): what are the differences?

The best wireless headphones around

Technics has a new pair of flagship over-ear wireless headphones. The EAH-A1000 follow 2022's EAH-A800, and aim to rival the Sony WH-1000XM6, Bose QuietComfort Ultra Headphones (2nd Gen) and Sennheiser HDB 630 as the best wireless headphones around.

Four years is long time in the headphone world – cans age in dog years. But thankfully Technics has brought its latest pair bang up to date on the technical front – these are no annual iterations, but a complete overhaul of the previous model. Technics says it "reconsidered every element" of the over-ears, with highlights of the new model including a new 40mm Magnetic Fluid Driver and acoustics technologies developed for the hi-fi brand's speakers.

The driver was developed to have precise control in order to deliver low distortion with an expansive soundstage. It uses Technics' magnetic fluid technology as found in its Award-winning EAH-AZ100 wireless earbuds – this material has both magnetic and liquid properties, and is placed between the voice coil and driver magnet to suppress unwanted vibrations and distortion.

The driver's performance is enhanced by the inclusion of an SST (Symmetrical Surround Technology) Edge, which is taken from Technics' flagship hi-fi speakers. This reduces distortion by improving the symmetry of the edge's back and forth movement as it supports the diaphragm. It's made of carbon fibre which is rigid yet lightweight, and its cone shape suppresses flexing to enable a fast response and stable movement.

Technics says that the two technologies work in tandem to "preserve the sense of scale in the bass and the spacious soundstage associated with over-ear headphones" while reproducing music how the artist intended.

A redesigned acoustic path preserves the air movement from the driver all the way to the ear, while a new Baffle Flat Structure reduces uneven surfaces around the driver to limit unwanted reflections, creating a natural sound field with clear imaging.

Airflow is managed by an Acoustic Control Chamber behind the driver, which should ensure a balanced sound. And Adaptive Noise Cancelling adjusts to your environment and fit, with three feed-forward microphones and one feedback mic on each side to detect and suppress noise from different directions.

The fit has also been re-engineered. The new Flow Arm headband is square at the slider but triangular at the hanger. As you can see from the pictures, it perches on the outside of the earcups like a luxuriously draped moustache.

The movement of the ear cups, refined headband shape and improved slider-based adjustability should distribute pressure evenly across your noggin, allowing you to wear them for longer periods without becoming uncomfortable. This will be helped by the memory foam earpads.

The headphones fold up into a ball for stowing in a bag.

They support high-quality audio via the LDAC codec and through wired listening over USB Audio. The battery is good for 45 hours with ANC on before needing a recharge, and like the Award-winning EAH-AZ100, they support three devices via Bluetooth Multipoint, instead of the standard two.

The Technics EAH-A1000 go on sale from 30th September for £399 / €449 / $449. They come in Black and Platinum Greige finishes (a mix of grey and beige).

Technics might be renowned for its turntables, but it does a nice line in headphones too – the EAH-AZ100 wireless earbuds won a What Hi-Fi? Award, while the A1000's predecessor pair (the EAH-A80) scored four stars. You can find out how the new EAH-A1000 headphones fare in our full review.

MORE:

Read our Technics EAH-A1000 headphones review

Same tech, different form factor: our Technics EAH-AZ100 earbuds review

Wireless headphones are about to get even more advanced with Qualcomm’s latest Snapdragon Sound tech

Technics might be a legendary name when it comes to turntables, but it has less household status when it comes to wireless headphones. The brand has been aiming to change that, and last year it came one step closer with the five-star EAH-AZ100 wireless earbuds, which beat out established rivals from Sony, Bose, B&W, Apple and Sennheiser to nab a coveted What Hi-Fi? Best Buy Award in 2025.

To see if they can repeat that success in the tough premium over-ears category, Technics has imbued its new flagship wireless headphones – the EAH-A1000 – with a refined design and plenty of new driver technology inspired by its hi-fi speakers and five-star earbuds. Has it done the job?

Price

The Technics EAH-A1000 launches at £399 / $449 / AU$699, which puts it right in the midst of some fiercely competitive territory. The class leaders in this bracket include the five-star Sennheiser HDB 630 at £400 / $500 / AU$1000, while the Award-winning Sony WH-1000XM6 can be found for £349 / $450 / AU$699.

Bowers & Wilkins’ Px7 S3 and Bose’s QuietComfort Ultra Headphones (2nd Gen) are also available at the same kind of money, so consumers aren’t short of high-quality choices at this premium end, where mainstream players mingle.

Design & comfort

These are a rather lovely pair of headphones. Where the predecessor EAH-A800 looked quite blocky, the EAH-A1000 has a much sleeker, more elegant look. The metal accents and refined contours on the headphones make them look and feel quite luxurious, as does the generous padding on both the headband and ear cups.

The headband is easy to adjust, and the inside of the ear cups is quite roomy, with plush memory foam ear cushions that hug your head quite snugly, but without any undue pressure. Technics has paid quite a lot of attention to the design and comfort of the A1000, with care taken over the metal ‘flow arm’ slider and hinges, and the angle of the ear cups so that there is an even pressure across the head when wearing them.

The headphones feel robust but also quite lightweight, and we find them to be a comfortable fit across the review team’s head sizes, even for those who wear glasses. Compared with the relatively slim profile of the Sony XM6 or Sonos Ace Ultra, the larger ear cups of the A1000 do stick out a fair bit, but overall they’re so nice and comfortable to wear that we don’t mind once they’re on our head.

The headphones fold up into a ball, too, which makes them easy to carry in a bag. They’re available in black or the nice silver/white colour of our review sample; Technics calls this colour ‘Platinum Greige’, but we’re going to ignore that.

Instead of any touch controls, Technics offers physical controls that are easy to use on the right ear cup. There are buttons for power and Bluetooth pairing, another one for changing the noise mode, and a multi-function slider control for changing volume, playing and pausing music, and summoning voice assistants.

They all work instantly with our commands, although we feel the slider control’s action could be more definite and feel more precise. It feels a little like a loose tooth on our sample, which mars the otherwise classy experience of using the A100.

Features

We must commend how swiftly the A1000 pairs with our source devices, with the connection remaining stable throughout our testing and reconnecting to our iPhone 16 without a hitch. Like their EAH-AZ100 earbuds counterparts, the A1000 over-ears feature three-way multi-point Bluetooth, which means you can be connected to three sources simultaneously and switch between them seamlessly – rivals are still limited to two devices only.

The A1000 supports the LDAC codec, allowing for higher-quality streams from compatible smartphones or portable music players such as the Sony NW-A306 and Astell & Kern SR35. Be warned that using the higher bandwidth LDAC disables certain features (such as the aforementioned three-way connection) and has a knock-on effect on battery life.

When listening using the standard AAC/SBC codecs, as we do for the majority of our testing with an iPhone 16, the battery life is an impressive 45 hours with ANC turned on. Turned off, this extends to a massive 90 hours. Those numbers are strong – they easily surpass the 30 hours offered by the Sony WH-1000XM6 and rivals from Bose and Bowers & Wilkins, although the Sennheiser HDB 630 still takes the lead at 60 hours with ANC turned on. We barely had to recharge the A1000 during our time with them, but a 15-minute charge does handily give you four hours of juice.

You can listen to the Technics EAH-A1000 using a wired USB-C connection, too – just note that the headphones need to be powered on to listen in this mode. You get two cables included in the hard carry case: a USB-C to 3.5mm audio cable, and a USB-C to USB-C lead for audio and charging.

We must commend how swiftly the A1000 pairs with our source devices, with the connection remaining stable throughout our testing and reconnecting to our iPhone 16 without a hitch. Like their EAH-AZ100 earbuds counterparts, the A1000 over-ears feature three-way multi-point Bluetooth, which means you can be connected to three sources simultaneously and switch between them seamlessly – rivals are still limited to two devices only.

The A1000 supports the LDAC codec, allowing for higher-quality streams from compatible smartphones or portable music players such as the Sony NW-A306 and Astell & Kern SR35. Be warned that using the higher bandwidth LDAC disables certain features (such as the aforementioned three-way connection) and has a knock-on effect on battery life.

When listening using the standard AAC/SBC codecs, as we do for the majority of our testing with an iPhone 16, the battery life is an impressive 45 hours with ANC turned on. Turned off, this extends to a massive 90 hours. Those numbers are strong – they easily surpass the 30 hours offered by the Sony WH-1000XM6 and rivals from Bose and Bowers & Wilkins, although the Sennheiser HDB 630 still takes the lead at 60 hours with ANC turned on. We barely had to recharge the A1000 during our time with them, but a 15-minute charge does handily give you four hours of juice.

You can listen to the Technics EAH-A1000 using a wired USB-C connection, too – just note that the headphones need to be powered on to listen in this mode. You get two cables included in the hard carry case: a USB-C to 3.5mm audio cable, and a USB-C to USB-C lead for audio and charging.

ANC & call quality

The EAH-A1000’s adaptive ANC performance uses four mics per side to adjust the noise levels according to your surrounding environment. In the app, you can choose the level of ANC on a scale of 0 to 100, or leave it in adaptive mode – curiously, we find that the adaptive mode does a better job of reducing rumbling traffic noise than full ANC.

The A1000’s noise-cancelling does a fine job of damping down surrounding noises – from train engines to traffic noises – enough that we can concentrate on our music. We spent a long-haul flight from Tokyo to London with the Technics headphones acting as a good buffer between our music and the plane’s engines (the plush cushioning helps here too), although frequent flyers might want even deeper, low-frequency rumbles to be silenced.

However, we are more aware of the sudden whoosh of passing cars and of background chatter here than on rivals, with the Sony XM6 dealing with such midrange and high-frequency noises more effectively. You can also feel the pressure of Technics’ ANC technology working hard when in adaptive ANC mode, which some may not like compared with Sony’s more natural, less-processed effect.

The customisable Ambient/transparency mode keeps you aware of your surroundings in a way that doesn’t feel too artificially amplified, while a further ‘attention’ mode enhances voices, so you never miss train announcements. The latter’s effect is more obviously processed, and we think the standard Ambient mode does the job well enough.

Call quality is a high point on the A1000, with our voices coming through clearly and with next-to-no background noise seeping through. We stand on a busy road during rush hour, and the caller on the other end can’t hear any traffic noise distracting from our voice. The Sony XM6 rival makes our voice sound fuller and more natural, but they also allow more background noise to cut through.

Sound

The biggest update Technics has made in its new flagship over-ear headphones is to do with the newly developed driver technologies. The Magnetic Fluid Driver technology worked so well for the AZ100 earbuds, it’s being used here again, albeit modified for the larger 40mm drivers in the A1000 over-ears. This aims to keep the movement of the driver consistent and reduce unwanted vibrations, without adding unnecessary mass.

The diaphragm is made of a lightweight yet rigid pure carbon fibre material, which, coupled with the driver’s cone shape and the SST (Symmetrical Surround Technology) Edge taken from Technics’ hi-fi speakers, aims to deliver a fast, accurate response with reduced distortion.

A redesigned acoustic control chamber further helps to manage airflow, with Technics promising a more natural soundfield for its “high precision music reproduction” to flourish.

Put it all together, and we’re met with a sound that is clear, spacious and very detailed.

Play Fallin’ by Alicia Keys, and her vocals soar in an open and roomy soundstage. The rough and raw edges of her singing come through with clarity and refinement, and the top notes have plenty of headroom to shine. Switch to Limit To Your Love by James Blake, and there is a satisfying amount of depth and solidity underpinning both his voice and the deep, plunging bass. The A1000’s presentation is full-bodied, with ample detail to voices and instruments giving them an immediacy that holds your attention.

Every instrument in The Dave Brubeck Quartet’s Take Five is fairly easy to place, with the robust, tuneful saxophone appropriately taking the spotlight, while the sharper hi-hats and snares in the background hit with crispness but don’t intrude unduly upon the composition. The overall sound is clean and clear – Technics has done a fine job at keeping distortion levels low, which means we don’t mind listening at louder volumes, either.

There is a sweetness and smoothness to the sound. This characteristic doesn’t attempt to gloss over any cracks or try to smother any harder edges; it simply makes for a refined balance that is appealing to listen to from the get-go.

While not obviously lacking in energy, we do wish the A1000 had a bit more verve and attack when required. The rival Sony XM6 and Sennheiser HDB 630 headphones counter with a more propulsive, driven sense of rhythm that sounds more musically coherent, with low-level dynamics handled with a bit more agility. The start and stop of notes could be more precisely defined on the Technics, with bass notes, while deep and fulsome, sounding just a touch soft around the edges.

They are simply more comfortable staying on the polite, gentler side of the fence rather than getting their hands dirty.

Despite this, the A1000’s sense of organisation and level of detail retrieval is admirable, and they don’t ever lose composure when confronted with more complex or busy recordings. They make the difference between a hi-res and low-res recording clear, but handle those lower-quality recordings with the same refined brush – it’s a quality that means we’re happy to listen to the headphones for hours on end.

Verdict

Technics’ EAH-A1000 are a fine pair of headphones. Their comfortable, elegant design and that refined, smooth presentation have plenty of appeal. There are many who will fall for the A1000’s charms, and we wouldn’t find much cause to deter them. At this level, however, the Sony WH-1000XM6 and Sennheiser HDB 630 rivals deliver just that bit more rhythmic precision and dynamic subtlety, leading to a more involving listening experience.

There’s plenty that Technics has done right with its new flagship over-ears. If they could combine just a bit more grit and punch alongside that sweet, open presentation, they could be on to a winner next time.

Review published: 29th September 2026

SCORES

• Sound 4
• Build 5
• Features 4

MORE:

Read our review of the Sony WH-1000XM6

Also consider the Sennheiser HDB 630

"This is the headphone we set out to create from the very beginning" – a closer look at the development of the new driver technology inside the premium Technics EAH-A1000 wireless headphones

Best wireless headphones: reviewed and rated by our in-house experts

Nothing has announced its latest pair of over-ear wireless headphones, the Headphone (1) Pro.

Following on from the original Headphone (1) and its more affordable Headphone (a) counterparts, the new Headphone (1) Pro sit atop the brand's over-ear range as its most advanced cans yet.

Aimed at audio enthusiasts seeking "the most detailed and customisable listening experience, the Headphone (1) Pro feature a triple driver architecture designed to more effectively cover the sonic spectrum.

Nothing teases punchy bass thanks to the headphones' bass dynamic driver, accompanied by textured vocals from a dynamic midrange unit and crisper highs courtesy of a new treble 'xMEMS' driver. For higher-fidelity playback up to 24-bit/192 kHz, you can connect to the new flagship cans via USB-C.

Nothing promises its best-ever active noise cancelling courtesy of the Headphone (1) Pros' 10-mic array and more isolating ear cushions. The brand's 'Clear Voice Technology', meanwhile, uses two mics on each side of the headphones to keep voices sounding clear and crisp.

What about battery life? The Nothing Headphone (1) really excelled in this area, granting a whopping 80 hours of playtime with ANC switched off and around 35 hours with noise cancelling turned on.

The more powerful Headphone (1) Pro don't quite match those numbers, but with 68 hours of playtime with ANC off and 30 hours with it on, plus four hours of listening from a 5-minute charge, they're hardly doing badly.

The Headphone (1) Pro are controlled using the Nothing X app, from which you can access a range of fine-tuning tools to personalise your experience.

This is an unashamedly Nothing pair of headphones in terms of looks, with the flagship cans sharing a similar design language with their more affordable forebears. The rectangular earcups return, boasting scratch-resistant glass which grants a glimpse of the drivers housed beneath.

Nothing also promises more even weight distribution thanks to a wider headband and thicker padding, as well as titanium arms and softer ear cushions to further aid user comfort. They're even IP52 rated, granting protection against water splashes and some dust ingress.

The Nothing Headphone (1) Pro are available now in Black or White finishes, priced at £349 / $399. That's a figure that puts them firmly in the mix with the likes of the Sony WH-1000XM6 (£349 / $400 / AU$699) and Sennheiser HDB 630 (£400 / $500 / AU$1000).

MORE:

In the market for wireless headphones? Read our recent Sonos Ace Ultra review

Rewind: A Swiss Army knife CD player, Sonos Beam and Ace Ultra reviews, next-gen upgrade for wireless headphones and more

New issue of What Hi-Fi? out now: it's a bumper 50th Anniversary special!

These are the best wireless headphones you can buy